web-dev-qa-db-ja.com

Androidエミュレーターが起動しない

2週間以上試した後、エミュレーターを正常に起動するのに苦労しています。私は本当に問題のいくつかのヘルプまたは同じトラブルシューティングのヒントを使用することができます。

非常によく似た設定を使用して、自宅のマシンでエミュレータを正常に起動できました。仕事用のPCから接続すると失敗します。これを停止する可能性のある構成があると思いますが、その構成が何であるかわからず、問題を特定するのに役立つエラーがログに表示されません。 。これは同僚にとっても一般的な問題であるため、ワークステーションで設定されているポリシーまたはレジストリ設定であると確信しています。

エミュレーターの起動を停止している構成を特定できるように誰かが助けてくれれば、ITチームと協力して必要な変更を加えることができます。

私の設定は

  • Android Studio 1.2.1.1
  • SDK/AVD Manager v 24.3.3
  • Windows 7 x64
  • 16 GB RAM
  • Dell E6540ラップトップ| Dell Optiplex 780デスクトップ
  • インストール済みのHAXM
  • 試したCPUオプション:Intel x86/x86_x64&Arm v7a
  • 試したRAMオプション:768MB、1GBおよび2GB
  • ホストGPU:オンとオフの両方で試しました
  • BIOSで仮想化が有効になっています

仮想デバイスは正常に作成されますが、正常に起動することはありません。窓が開いているのを見たことがありません。何度か2時間以上待ちました。

ここに私が作成した3つのAVDのログがあります

AVD 1

アームv7a | 768 MB RAM | Android 5.1.1 | API 22 |ホストGPUオフ

AVD 1 | Arm v7a | 768 MB RAM | Android 5.1.1 | API 22 | Host GPU Off

出力:

emulator:Found AVD name 'avd1'
emulator:Found AVD target architecture: arm
emulator:Looking for ranchu emulator backed for arm CPU
emulator:Probing program: ./emulator64-ranchu-arm.exe
emulator:Probing program: ./emulator-ranchu-arm.exe
emulator:Probing path for: emulator64-ranchu-arm.exe
emulator:Probing path for: emulator-ranchu-arm.exe
emulator:Looking for emulator-arm to emulate 'arm' CPU
emulator:Probing program: ./emulator-arm.exe
emulator:Found target-specific emulator binary: ./emulator-arm.exe
emulator:GPU emulation is disabled
emulator:Quoted param: [./emulator-arm.exe]
emulator:Quoted param: [@avd1]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.Android\avd\avd1.ini
emulator: virtual device content at C:\Users\Anon\.Android\avd\avd1.avd
emulator: virtual device config file: C:\Users\Anon\.Android\avd\avd1.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.Android\avd\avd1.avd/hardware-qemu.ini
emulator: Found AVD target API level: 22
emulator: Read property file at C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/build.prop
emulator: No boot.prop property file found.
emulator: 'magic' skin format detected: 768x1280
emulator: autoconfig: -skin 768x1280
emulator: autoconfig: -skindir (null)
emulator: keyset loaded from: C:\Users\Anon\.Android\default.keyset
emulator: found magic skin width=768 height=1280 bpp=16

emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does not support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/system.img
emulator: autoconfig: -initdata C:\Users\Anon\.Android\avd\avd1.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.Android\avd\avd1.avd/cache.img
emulator: Physical RAM size: 768MB

emulator: GPU emulation is disabled
emulator: WARNING: CPU acceleration only works with x86/x86_64 system images.
Content of hardware configuration file:
  hw.cpu.Arch = arm
  hw.cpu.model = cortex-a8
  hw.ramSize = 768
  hw.screen = touch
  hw.mainKeys = no
  hw.trackBall = no
  hw.keyboard = yes
  hw.keyboard.lid = no
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = no
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.Android\avd\avd1.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 768
  hw.lcd.height = 1280
  hw.lcd.depth = 16
  hw.lcd.density = 320
  hw.lcd.backlight = yes
  hw.gpu.enabled = no
  hw.initialOrientation = portrait
  hw.camera.back = none
  hw.camera.front = none
  vm.heapSize = 64
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = yes
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish Android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = no
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/ramdisk.img
  À¿)pV)ußK³ªc¥ú&µß>Oí‡yù®ù×=Vš§Ùïq—#ÊÿŠÿ¿Ù&Òßué—!MáÍFåÿ¾U)›±„yþ¿ƒð—ˆ_ˆøõÊ'Ò?{’é×@zQ¿Ü•úíÈQêñ©•„yÖ/þ[â—"~ü«|ü¶,%~em.img
  disk.systemPartition.size = 550m
  disk.dataPartition.path = C:\Users\Anon\.Android\avd\avd1.avd/userdata-qemu.img
  disk.dataPartition.initPath = C:\Users\Anon\.Android\avd\avd1.avd/userdata.img
  disk.dataPartition.size = 550m
  avd.name = avd1
.
QEMU options list:
emulator: argv[00] = "./emulator-arm.exe"
emulator: argv[01] = "-Android-hw"
emulator: argv[02] = "C:\Users\Anon\.Android\avd\avd1.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-arm.exe -Android-hw C:\Users\Anon\.Android\avd\avd1.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: Ramdisk image contains fstab.goldfish file
emulator: Found format of system partition: 'ext4'
emulator: Found format of userdata partition: 'ext4'
emulator: Found format of cache partition: 'ext4'
emulator: system partition format: ext4
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMP2084.tmp
emulator: nand_add_dev: system,size=0x22600000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMP2084.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-22\default\armeabi-v7a\/system.img,pagesize=512,extrasize=0
emulator: userdata partition format: ext4
emulator: nand_add_dev: userdata,size=0x22600000,file=C:\Users\Anon\.Android\avd\avd1.avd/userdata-qemu.img,initfile=C:\Users\Anon\.Android\avd\avd1.avd/userdata.img,pagesize=512,extrasize=0
emulator: cache partition format: ext4
emulator: Creating empty cache partition image at: C:\Users\Anon\.Android\avd\avd1.avd/cache.img
Creating filesystem with parameters:
    Size: 69206016
    Block size: 4096
    Blocks per group: 32768
    Inodes per group: 4224
    Inode size: 256
    Journal blocks: 1024
    Label: 
    Blocks: 16896
    Block groups: 1
    Reserved block group size: 7
Created filesystem with 11/4224 inodes and 1302/16896 blocks
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.Android\avd\avd1.avd/cache.img,pagesize=512,extrasize=0
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '64m'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '320'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'none'
emulator: Kernel parameters: qemu.gles=0 qemu=1 console=ttyS0 Android.qemud=ttyS1 androidboot.hardware=goldfish Android.checkjni=1 ndns=3
emulator: autoconfig: -scale 0.801562

AVD 2

Intel Atom x86 | 1536 MB RAM | Android 4.3.1 | API 18 | Use Host GPU ON

AVD 2 | Intel Atom x86 | 1536 MB RAM | Android 4.3.1 | API 18 | Use Host GPU ON

emulator:Found AVD name 'avd2'
emulator:Found AVD target architecture: x86
emulator:Looking for ranchu emulator backed for x86 CPU
emulator:Probing program: ./emulator64-ranchu-x86.exe
emulator:Probing program: ./emulator-ranchu-x86.exe
emulator:Probing path for: emulator64-ranchu-x86.exe
emulator:Probing path for: emulator-ranchu-x86.exe
emulator:Looking for emulator-x86 to emulate 'x86' CPU
emulator:Probing program: ./emulator-x86.exe
emulator:Found target-specific emulator binary: ./emulator-x86.exe
emulator:GPU emulation enabled using 'Host' mode
emulator:Quoted param: [./emulator-x86.exe]
emulator:Quoted param: [@avd2]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.Android\avd\avd2.ini
emulator: virtual device content at C:\Users\Anon\.Android\avd\avd2.avd
emulator: virtual device config file: C:\Users\Anon\.Android\avd\avd2.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.Android\avd\avd2.avd/hardware-qemu.ini
emulator: Found AVD target API level: 18
emulator: Read property file at C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/build.prop
emulator: No boot.prop property file found.
emulator: 'magic' skin format detected: 768x1280
emulator: autoconfig: -skin 768x1280
emulator: autoconfig: -skindir (null)
emulator: keyset loaded from: C:\Users\Anon\.Android\default.keyset
emulator: trying to load skin file 'C:\Users\Anon\AppData\Local\Android\sdk/tools/lib/emulator/skins/dynamic//layout'
emulator: loaded dynamic skin width=768 height=1280 bpp=16

emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/system.img
emulator: autoconfig: -initdata C:\Users\Anon\.Android\avd\avd2.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.Android\avd\avd2.avd/cache.img
emulator: Physical RAM size: 1536MB

emulator: GPU emulation enabled using 'Host' mode
emulator: CPU Acceleration: working
emulator: CPU Acceleration status: HAX (version 2) is installed and usable.
emulator: Target Arch = 'x86'
emulator: Auto-config: -qemu -cpu qemu32
Content of hardware configuration file:
  hw.cpu.Arch = x86
  hw.cpu.model = qemu32
  hw.ramSize = 1536
  hw.screen = touch
  hw.mainKeys = no
  hw.trackBall = no
  hw.keyboard = yes
  hw.keyboard.lid = no
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = no
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.Android\avd\avd2.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 768
  hw.lcd.height = 1280
  hw.lcd.depth = 16
  hw.lcd.density = 320
  hw.lcd.backlight = yes
  hw.gpu.enabled = yes
  hw.gpu.mode = Host
  hw.initialOrientation = portrait
  hw.camera.back = emulated
  hw.camera.front = emulated
  vm.heapSize = 64
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = yes
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish clocksource=pit Android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = yes
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/ramdisk.img
  disk.systemPartition.initPath = C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/system.img
  disk.systemPartition.size = 281m
  disk.dataPartition.path = C:\Users\Anon\.Android\avd\avd2.avd/userdata-qemu.img
  disk.dataPartition.initPath = C:\Users\Anon\.Android\avd\avd2.avd/userdata.img
  disk.dataPartition.size = 200m
  avd.name = avd2
.
QEMU options list:
emulator: argv[00] = "./emulator-x86.exe"
emulator: argv[01] = "-enable-hax"
emulator: argv[02] = "-Android-hw"
emulator: argv[03] = "C:\Users\Anon\.Android\avd\avd2.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-x86.exe -enable-hax -Android-hw C:\Users\Anon\.Android\avd\avd2.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: Ramdisk image contains fstab.goldfish file
emulator: Could not extract format of system partition!
emulator: Could not extract format of userdata partition!
emulator: Could not extract format of cache partition!
emulator: Probing system image file for partition type: C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/system.img
emulator: system partition format: yaffs2
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPA30C.tmp
emulator: nand_add_dev: system,size=0x11900000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPA30C.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/system-images\Android-18\default\x86\/system.img
emulator: rounding devsize up to a full eraseunit, now 11904000

emulator: Probing userdata image file for partition type: C:\Users\Anon\.Android\avd\avd2.avd/userdata.img
emulator: userdata partition format: yaffs2
emulator: nand_add_dev: userdata,size=0xc800000,file=C:\Users\Anon\.Android\avd\avd2.avd/userdata-qemu.img,initfile=C:\Users\Anon\.Android\avd\avd2.avd/userdata.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: cache partition format: yaffs2
emulator: Creating empty cache partition image at: C:\Users\Anon\.Android\avd\avd2.avd/cache.img
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.Android\avd\avd2.avd/cache.img
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '64m'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '320'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '0'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'both'
emulator: Initializing hardware OpenGLES emulation support
emulator: OpenGL Vendor=[Google (Intel)]
emulator: OpenGL Renderer=[Android Emulator OpenGL ES Translator (Intel(R) HD Graphics 4600)]
emulator: OpenGL Version=[OpenGL ES 2.0 (4.0.0 - Build 9.18.10.3220)]
emulator: Adding boot property: 'ro.opengles.version' = '131072'
emulator: device fd:988

emulator: Kernel parameters: qemu.gles=1 qemu=1 console=ttyS0 Android.qemud=ttyS1 androidboot.hardware=goldfish clocksource=pit Android.checkjni=1 ndns=3
emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/bios.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/lib/pc-bios/bios.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/vgabios-cirrus.bin

emulator:     trying to find: C:\Users\Anon\AppData\Local\Android\sdk\tools/lib/pc-bios/vgabios-cirrus.bin

emulator: autoconfig: -scale 0.801562

AVD 3

アーム| 512 MB RAM | Android 2.3.3 | API 10 | Use Host GPU OFF

AVD 3 | ARM | 512 MB RAM | Android 2.3.3 | API 10 | Use Host GPU OFF

emulator:Found AVD name 'avd3'
emulator:Found AVD target architecture: arm
emulator:Looking for ranchu emulator backed for arm CPU
emulator:Probing program: ./emulator64-ranchu-arm.exe
emulator:Probing program: ./emulator-ranchu-arm.exe
emulator:Probing path for: emulator64-ranchu-arm.exe
emulator:Probing path for: emulator-ranchu-arm.exe
emulator:Looking for emulator-arm to emulate 'arm' CPU
emulator:Probing program: ./emulator-arm.exe
emulator:Found target-specific emulator binary: ./emulator-arm.exe
emulator:GPU emulation is disabled
emulator:Quoted param: [./emulator-arm.exe]
emulator:Quoted param: [@avd3]
emulator:Quoted param: [-verbose]
emulator: found SDK root at C:\Users\Anon\AppData\Local\Android\sdk
emulator: Android virtual device file at: C:\Users\Anon\.Android\avd\avd3.ini
emulator: virtual device content at C:\Users\Anon\.Android\avd\avd3.avd
emulator: virtual device config file: C:\Users\Anon\.Android\avd\avd3.avd/config.ini
emulator: using core hw config path: C:\Users\Anon\.Android\avd\avd3.avd/hardware-qemu.ini
emulator: Found AVD target API level: 10
emulator: No build.prop property file found.
emulator: No boot.prop property file found.
emulator: Cannot find target CPU architecture, defaulting to 'arm'
emulator: Cannot find target CPU ABI, defaulting to 'armeabi'
emulator: found skin 'WQVGA400' in directory: C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\skins
emulator: autoconfig: -skin WQVGA400
emulator: autoconfig: -skindir C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\skins
emulator: found skin-specific hardware.ini: C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\skins/WQVGA400/hardware.ini
emulator: keyset loaded from: C:\Users\Anon\.Android\default.keyset
emulator: trying to load skin file 'C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\skins/WQVGA400/layout'
emulator: skin network speed: 'full'
emulator: skin network delay: 'none'
emulator: autoconfig: -kernel C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/kernel-qemu
emulator: Auto-detect: Kernel image requires legacy device naming scheme.
emulator: Auto-detect: Kernel does support YAFFS2 partitions.
emulator: autoconfig: -ramdisk C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/ramdisk.img
emulator: Using initial system image: C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/system.img
emulator: autoconfig: -data C:\Users\Anon\.Android\avd\avd3.avd/userdata-qemu.img
emulator: autoconfig: -initdata C:\Users\Anon\.Android\avd\avd3.avd/userdata.img
emulator: autoconfig: -cache C:\Users\Anon\.Android\avd\avd3.avd/cache.img
emulator: Physical RAM size: 256MB

emulator: GPU emulation is disabled
emulator: WARNING: CPU acceleration only works with x86/x86_64 system images.
emulator: Target Arch = 'arm'
Content of hardware configuration file:
  hw.cpu.Arch = arm
  hw.ramSize = 256
  hw.screen = touch
  hw.mainKeys = yes
  hw.trackBall = yes
  hw.keyboard = yes
  hw.keyboard.lid = yes
  hw.keyboard.charmap = qwerty2
  hw.dPad = no
  hw.gsmModem = yes
  hw.gps = yes
  hw.battery = yes
  hw.accelerometer = yes
  hw.audioInput = yes
  hw.audioOutput = yes
  hw.sdCard = yes
  disk.cachePartition = yes
  disk.cachePartition.path = C:\Users\Anon\.Android\avd\avd3.avd/cache.img
  disk.cachePartition.size = 66m
  hw.lcd.width = 240
  hw.lcd.height = 400
  hw.lcd.depth = 16
  hw.lcd.density = 120
  hw.lcd.backlight = yes
  hw.gpu.enabled = no
  hw.initialOrientation = portrait
  hw.camera.back = none
  hw.camera.front = none
  vm.heapSize = 32
  hw.sensors.proximity = yes
  hw.sensors.magnetic_field = yes
  hw.sensors.orientation = no
  hw.sensors.temperature = yes
  hw.useext4 = yes
  kernel.path = C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/kernel-qemu
  kernel.parameters =  androidboot.hardware=goldfish Android.checkjni=1
  kernel.newDeviceNaming = no
  kernel.supportsYaffs2 = yes
  disk.ramdisk.path = C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/ramdisk.img
  disk.systemPartition.initPath = C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/system.img
  disk.systemPartition.size = 200m
  disk.dataPartition.path = C:\Users\Anon\.Android\avd\avd3.avd/userdata-qemu.img
  disk.dataPartition.size = 200m
  avd.name = avd3
.
QEMU options list:
emulator: argv[00] = "./emulator-arm.exe"
emulator: argv[01] = "-Android-hw"
emulator: argv[02] = "C:\Users\Anon\.Android\avd\avd3.avd/hardware-qemu.ini"
Concatenated QEMU options:
 ./emulator-arm.exe -Android-hw C:\Users\Anon\.Android\avd\avd3.avd/hardware-qemu.ini
emulator: registered 'boot-properties' qemud service
emulator: Using kernel serial device prefix: ttyS
emulator: No fstab.goldfish file in ramdisk image
emulator: Probing system image file for partition type: C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/system.img
emulator: system partition format: yaffs2
emulator: Mapping 'system' partition image to C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPE615.tmp
emulator: nand_add_dev: system,size=0xc800000,file=C:\Users\Anon\AppData\Local\Temp\\AndroidEmulator\TMPE615.tmp,initfile=C:\Users\Anon\AppData\Local\Android\sdk/platforms\Android-10\images\/system.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: Probing userdata image file for partition type: C:\Users\Anon\.Android\avd\avd3.avd/userdata-qemu.img
emulator: userdata partition format: yaffs2
emulator: nand_add_dev: userdata,size=0xc800000,file=C:\Users\Anon\.Android\avd\avd3.avd/userdata-qemu.img
emulator: rounding devsize up to a full eraseunit, now c810000

emulator: cache partition format: yaffs2
emulator: nand_add_dev: cache,size=0x4200000,file=C:\Users\Anon\.Android\avd\avd3.avd/cache.img
emulator: registered 'boot-properties' qemud service
emulator: Adding boot property: 'dalvik.vm.heapsize' = '32m'
emulator: Adding boot property: 'ro.config.low_ram' = 'true'
emulator: Adding boot property: 'qemu.sf.lcd_density' = '120'
emulator: Adding boot property: 'qemu.hw.mainkeys' = '1'
emulator: Adding boot property: 'qemu.sf.fake_camera' = 'none'
emulator: Kernel parameters: qemu.gles=0 qemu=1 console=ttyS0 Android.qemud=ttyS1 androidboot.hardware=goldfish Android.checkjni=1 ndns=3
emulator: autoconfig: -scale 1
16
Jugal Thakkar

HAXMを適切にインストールしましたか?

HAXMがまだ有効になっていない Android sdk manager。 enter image description here

Intel HAXMドライバーを使用してAndroid *エミュレーターを最大限に活用するには、いくつかの手順を実行する必要があります。

前提条件

Intel HAXMでは、Android * SDKがインストールされている必要があります(バージョン17以降)。詳細については、Android *開発者のWebサイト( http://developer.Android.com/sdk/ )を参照してください。

System Requirements

Hardware Requirements:

Intel® processor with support for Intel® VT-x, Intel® EM64T (Intel® 64), and Execute Disable (XD) Bit functionality
At least 1 GB of available RAM
Supported Operating Systems:

Microsoft Windows* 8 and 8.1 (32/64-bit)
Microsoft Windows* 7 (32/64-bit)
Microsoft Windows Vista* (32/64-bit)
Important: Intel HAXM cannot be used on systems without an Intel processor, or with an Intel processor that lacks the hardware features described in the "Hardware Requirements" section above.
To determine the capabilities of your Intel processor, visit http://ark.intel.com/
Additionally, Intel HAXM can be used only with Android* x86 emulator images provided by Intel. 
Intel HAXM cannot be used with ARM* Android* emulator images or non-Intel x86 Android* emulator images.
  1. メインSDKディレクトリの下。 SDKマネージャーは「インストール済み」と表示しますが、実際にはIntel HAXM実行可能ファイルがダウンロードされたことを意味します。インストーラをインストールするには、「extras」ディレクトリからインストーラを実行する必要があります。

2.「extras」ディレクトリ内のインストーラーを抽出し、プラットフォームのインストール手順に従います。

enter image description here

Windows *にインテル®HAXMをインストールする

警告:システムがIntel Virtualization Technology(Intel VT)などのIntelプロセッサ機能のサポートを含むシステム要件を満たしていない場合、Intel HAXMのインストールは失敗します。

enter image description hereenter image description hereenter image description hereenter image description here

すべてのステップの後、それは適切に動作します。 enter image description here

それが役立つことを願っています... heres Intel documentation

8

試してみたいと思うアイデアの1つは、古いバージョンのAndroid(2.1や2.2など)のAVDを作成することです。私の経験では、これらのバージョンはエミュレーション下でも妥当な速度で起動します。プロジェクトの作成には役立ちませんが、エミュレータが一般的に機能しているかどうかを判断するのに役立ちます。

3
Eugene Styer

私は使っている API 22 : Android 5.1.1。私は同じ問題に直面していたので、最新のシステムイメージをAndroid SDKマネージャーからダウンロードしてNexus 5エミュレーターを実行しました。

システムイメージは

Google API ARM EABI v7a System Image

そして、Android Virtual Device Managerで仮想デバイスを作成するときにこのシステムイメージを選択しました。スナップショットの保存チェックボックスをオンにしていることを確認してください。 。

使用するエミュレータを決定し、それに応じてシステムイメージを選択する必要があります。例えばNexus 5には(そのような)アームプロセッサがあります。また、エミュレータのすべてのシステムイメージをダウンロードする必要があります。 enter image description here

2
Shekhar

これらを試すことができます:

1)スキンはデフォルトでWVGA800に設定されており、HVGAに変更してみてください。

2)場合によってはgraphic card and driversの問題です(別のシステムでこれを試したと言いましたが、ドライバーが同じかどうかを確認しますか?)

3)エミュレータのscreen sizeが原因である可能性があります。構成ファイルのlcd.height, lcd.width, skin.name, skin.pathを変更してみてください

2
gRaWEty

フォルダー内のデータをワイプC:\Users\<username>\.Android\ avd and cacheその後、最初からAVDの作成を開始します。 enter image description here

2
NilayDani