ビットマップファイルを構造に読み込む
ビットマップファイルを構造体に読み込み、ミラー効果などを作成するように操作したいのですが、読み込むためにどのような構造体を作成する必要があるのか理解できません。
ご協力ありがとうございました
"これは、bmpファイルを手動でロードする方法です。
ビットマップファイル形式：ビットマップファイルヘッダービットマップ情報ヘッダーパレットデータビットマップDada
コード部分では、ビットマップファイルヘッダーを保持するために作成する必要がある構造体です。
#pragma pack(Push, 1)
typedef struct tagBITMAPFILEHEADER
{
Word bfType; //specifies the file type
DWORD bfSize; //specifies the size in bytes of the bitmap file
Word bfReserved1; //reserved; must be 0
Word bfReserved2; //reserved; must be 0
DWORD bfOffBits; //species the offset in bytes from the bitmapfileheader to the bitmap bits
}BITMAPFILEHEADER;
#pragma pack(pop)
bftypeフィールドは、bmpファイルを実際にロードしているかどうかを確認します。フィールドが0x4D42である必要があります。
次に、bitmapinfoheader構造体を作成する必要があります。これは、ビットマップに関する情報を保持します。
#pragma pack(Push, 1)
typedef struct tagBITMAPINFOHEADER
{
DWORD biSize; //specifies the number of bytes required by the struct
LONG biWidth; //specifies width in pixels
LONG biHeight; //species height in pixels
Word biPlanes; //specifies the number of color planes, must be 1
Word biBitCount; //specifies the number of bit per pixel
DWORD biCompression;//spcifies the type of compression
DWORD biSizeImage; //size of image in bytes
LONG biXPelsPerMeter; //number of pixels per meter in x axis
LONG biYPelsPerMeter; //number of pixels per meter in y axis
DWORD biClrUsed; //number of colors used by th ebitmap
DWORD biClrImportant; //number of colors that are important
}BITMAPINFOHEADER;
#pragma pack(pop)
次に、ビットマップをロードします
unsigned char *LoadBitmapFile(char *filename, BITMAPINFOHEADER *bitmapInfoHeader)
{
FILE *filePtr; //our file pointer
BITMAPFILEHEADER bitmapFileHeader; //our bitmap file header
unsigned char *bitmapImage; //store image data
int imageIdx=0; //image index counter
unsigned char tempRGB; //our swap variable
//open filename in read binary mode
filePtr = fopen(filename,"rb");
if (filePtr == NULL)
return NULL;
//read the bitmap file header
fread(&bitmapFileHeader, sizeof(BITMAPFILEHEADER),1,filePtr);
//verify that this is a bmp file by check bitmap id
if (bitmapFileHeader.bfType !=0x4D42)
{
fclose(filePtr);
return NULL;
}
//read the bitmap info header
fread(bitmapInfoHeader, sizeof(BITMAPINFOHEADER),1,filePtr); // small edit. forgot to add the closing bracket at sizeof
//move file point to the begging of bitmap data
fseek(filePtr, bitmapFileHeader.bfOffBits, SEEK_SET);
//allocate enough memory for the bitmap image data
bitmapImage = (unsigned char*)malloc(bitmapInfoHeader->biSizeImage);
//verify memory allocation
if (!bitmapImage)
{
free(bitmapImage);
fclose(filePtr);
return NULL;
}
//read in the bitmap image data
fread(bitmapImage,bitmapInfoHeader->biSizeImage,filePtr);
//make sure bitmap image data was read
if (bitmapImage == NULL)
{
fclose(filePtr);
return NULL;
}
//swap the r and b values to get RGB (bitmap is BGR)
for (imageIdx = 0;imageIdx < bitmapInfoHeader->biSizeImage;imageIdx+=3) // fixed semicolon
{
tempRGB = bitmapImage[imageIdx];
bitmapImage[imageIdx] = bitmapImage[imageIdx + 2];
bitmapImage[imageIdx + 2] = tempRGB;
}
//close file and return bitmap iamge data
fclose(filePtr);
return bitmapImage;
}
これをすべて利用するために：
BITMAPINFOHEADER bitmapInfoHeader;
unsigned char *bitmapData;
...
bitmapData = LoadBitmapFile("mypic.bmp",&bitmapInfoHeader);
//now do what you want with it, later on i will show you how to display it in a normal window
後で病気にbmpへの書き込みとtargaファイルのロード方法とそれらの表示方法を挙げました。"
引用元： http://www.vbforums.com/showthread.php?261522-CC-Loading-Bitmap-Files-%28Manually%29 （ユーザー： BeholderOf）。 （いくつかのマイナーな修正が行われました）
ここ 短い作業例。
Wavファイルをbmpに変換します（昔、私はとても楽しかったです）。
コード：
#include <stdio.h>
#include <strings.h>
#include <sndfile.h>
#include <stdlib.h>
#include <math.h>
#define RATE 44100
typedef struct {
unsigned short type; /* Magic identifier */
unsigned int size; /* File size in bytes */
unsigned int reserved;
unsigned int offset; /* Offset to image data, bytes */
} HEADER;
typedef struct {
unsigned int size; /* Header size in bytes */
int width,height; /* Width and height of image */
unsigned short planes; /* Number of colour planes */
unsigned short bits; /* Bits per pixel */
unsigned int compression; /* Compression type */
unsigned int imagesize; /* Image size in bytes */
int xresolution,yresolution; /* Pixels per meter */
unsigned int ncolours; /* Number of colours */
unsigned int importantcolours; /* Important colours */
} INFOHEADER;
typedef struct {
unsigned char r,g,b,junk;
} COLOURINDEX;
int main(int argc, char *argv[]){
int i,j,rd;
int gotindex = 0;
unsigned char grey,r,g,b;
double ampl;
short _2byte[2];
HEADER header;
INFOHEADER infoheader;
COLOURINDEX colourindex[256];
FILE *fptr;
SNDFILE* sndfile = NULL;
SF_INFO sfinfo;
long rate = RATE;
void (*bmpread)();
void _eightbit(){
if(fread(&grey, sizeof(unsigned char), 1, fptr) != 1){
fprintf(stderr,"Image read failed\n");
exit(-1);
}
if (gotindex){
ampl = colourindex[grey].r * 64. +
colourindex[grey].g * 128.+
colourindex[grey].b * 64.;
} else {
ampl = grey * 256. - 32768.;
}
// printf("%.2f\n", ampl);
}
void _twentyfourbit(){
do{
if((rd = fread(&b, sizeof(unsigned char), 1, fptr)) != 1) break;
if((rd = fread(&g, sizeof(unsigned char), 1, fptr)) != 1) break;
if((rd = fread(&r, sizeof(unsigned char), 1, fptr)) != 1) break;
}while(0);
if(rd != 1){
fprintf(stderr,"Image read failed\n");
exit(-1);
}
ampl = r * 64. + g * 128. + b * 64. - 32768.;
// printf("%.2f\n", ampl);
}
if (argc < 3){
printf("Usage: %s <input.bmp> <output.wav> [samplerate]\n", argv[0]);
printf("For example:\n\t%s pict.bmp sample.wav 44100 2\n", argv[0]);
exit(0);
}
printf("Input file: %s\n", argv[1]);
printf("Output file: %s\n", argv[2]);
if(argc > 3) rate = atoi(argv[3]);
if(rate < 4000) rate = 4000;
//if(argc > 4) channels = atoi(argv[4]);
sfinfo.samplerate = rate;
sfinfo.channels = 2;
sfinfo.format = SF_FORMAT_WAV|SF_FORMAT_PCM_16;
if((fptr = fopen(argv[1],"r")) == NULL) {
fprintf(stderr,"Unable to open BMP file \"%s\"\n",argv[1]);
exit(-1);
}
/* Read and check BMP header */
if(fread(&header.type, 2, 1, fptr) != 1){
fprintf(stderr, "Failed to read BMP header\n");
exit(-1);
}
if(header.type != 'M'*256+'B'){
fprintf(stderr, "File is not bmp type\n");
exit(-1);
}
do{
if((rd = fread(&header.size, 4, 1, fptr)) != 1) break;
printf("File size: %d bytes\n", header.size);
if((rd = fread(&header.reserved, 4, 1, fptr)) != 1) break;
if((rd = fread(&header.offset, 4, 1, fptr)) != 1) break;
printf("Offset to image data is %d bytes\n", header.offset);
}while(0);
if(rd =! 1){
fprintf(stderr, "Error reading file\n");
exit(-1);
}
/* Read and check the information header */
if (fread(&infoheader, sizeof(INFOHEADER), 1, fptr) != 1) {
fprintf(stderr,"Failed to read BMP info header\n");
exit(-1);
}
printf("Image size = %d x %d\n", infoheader.width, infoheader.height);
printf("Number of colour planes is %d\n", infoheader.planes);
printf("Bits per pixel is %d\n", infoheader.bits);
printf("Compression type is %d\n", infoheader.compression);
printf("Number of colours is %d\n", infoheader.ncolours);
printf("Number of required colours is %d\n", infoheader.importantcolours);
/* Read the lookup table if there is one */
for (i=0; i<255; i++){
colourindex[i].r = Rand() % 256;
colourindex[i].g = Rand() % 256;
colourindex[i].b = Rand() % 256;
colourindex[i].junk = Rand() % 256;
}
if (infoheader.ncolours > 0) {
for (i=0; i<infoheader.ncolours; i++){
do{
if ((rd = fread(&colourindex[i].b, sizeof(unsigned char),1,fptr)) != 1)
break;
if ((rd = fread(&colourindex[i].g, sizeof(unsigned char),1,fptr)) != 1)
break;
if ((rd = fread(&colourindex[i].r, sizeof(unsigned char),1,fptr)) != 1)
break;
if ((rd = fread(&colourindex[i].junk, sizeof(unsigned char),1,fptr)) != 1)
break;
}while(0);
if(rd != 1){
fprintf(stderr,"Image read failed\n");
exit(-1);
}
printf("%3d\t%3d\t%3d\t%3d\n", i,
colourindex[i].r, colourindex[i].g, colourindex[i].b);
}
gotindex = 1;
}
if(infoheader.bits < 8){
printf("Too small image map depth (%d < 8)\n", infoheader.bits);
exit(-1);
}
/* Seek to the start of the image data */
fseek(fptr, header.offset, SEEK_SET);
printf("Creating 16bit WAV %liHz.\n", rate);
sndfile = sf_open(argv[2], SFM_WRITE, &sfinfo);
if(sndfile == NULL){
fprintf(stderr, "Cannot open output file!\n"); exit(-1);
}
bmpread = _eightbit;
if(infoheader.bits == 24)
bmpread = _twentyfourbit;
/* Read the image */
for (j=0;j<infoheader.height;j++) {
_2byte[1] = 32700;
for (i=0;i<infoheader.width;i++) {
bmpread();
_2byte[0] = (short)ampl;
sf_write_short(sndfile, _2byte, 2);
_2byte[1] = 0;
} // i
} // j
fclose(fptr);
sf_close(sndfile);
}