web-dev-qa-db-ja.com

壊滅的なHDDパフォーマンスの低下

Seagate Barracuda 500GBハードドライブは最近(数週間前に)ファームウェアのアップグレードを受けました。 (CC38からCC49ファームウェアバージョンへ)先週、この地域で雷雨も発生しました(いくつかの停電を含む)2日前にハードドライブのパフォーマンスが大幅に低下しました-連続読み取りは最大800KB /秒のスループットで実行されています。 SATAポートを変更し、別のOSを起動してみましたが、現在、別のPCを使用してハードドライブのデータをバックアップしています。信じられないほど遅いですが、データを正しく読み取っているようです。 SMARTツールは合格したテストを報告します:

smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-rc3] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500418AS
Serial Number:    9VMN4Z6D
LU WWN Device Id: 5 000c50 027447858
Firmware Version: CC49
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Jan 13 23:32:57 2013 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  84) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   109   099   006    Pre-fail  Always       -       22542089
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3565
  5 Reallocated_Sector_Ct   0x0033   051   051   036    Pre-fail  Always       -       2013
  7 Seek_Error_Rate         0x000f   081   060   030    Pre-fail  Always       -       165327293
  9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       8967
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1760
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       8590065677
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   061   051   045    Old_age   Always       -       39 (Min/Max 29/41)
194 Temperature_Celsius     0x0022   039   049   000    Old_age   Always       -       39 (0 17 0 0 0)
195 Hardware_ECC_Recovered  0x001a   040   023   000    Old_age   Always       -       22542089
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       13232794252195
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1062670152
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2187342803

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by Host               90%      8934         -
# 2  Conveyance offline  Aborted by Host               90%      8891         -
# 3  Short offline       Aborted by Host               90%      8891         -
# 4  Short offline       Aborted by Host               90%      8892         -
# 5  Short offline       Aborted by Host               90%      8891         -
# 6  Short offline       Interrupted (Host reset)      30%      8874         -
# 7  Extended offline    Aborted by Host               90%      8873         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

ドライブの交換が必要なようですが、どのような損傷がこのような症状を引き起こす可能性があるのでしょうか。そして、なぜこの損傷はSMARTによって報告されないのですか?どんな推測や提案も歓迎します。

4
EFraim

私が考えることができる唯一のことは、突然の停電(したがって、電圧スパイクの可能性)がドライブのいくつかの電子部品に問題を引き起こしたということです。このような予期しない障害がSMARTで検出できない場合があります。

2
user190693

マザーボードで「HD」の問題が発生し、HDの読み取りが断続的にロックされていました。問題は、単一の4x PCiExpressバスソケットに追加したUSB3pci-Expressカードの破損したコンデンサにありました。ドライブを別のPCに接続してデータをバックアップしましたが、レートは同じように調整されていますか?これにつながる可能性のあるもう1つのことは、BIOSでブロックモードがオフになっていることです。ただし、ATAバス0_oにのみ適用されるものを参照している可能性があります。

2
offchaos