MegaCLIRAID1-不足しているディスクを交換できません
エラーのあるディスクを交換したRAID1がありますが、自動的に、または「欠落している」ディスクを新しいディスクに手動で交換することはできません。
コントローラごとの物理ディスクは次のとおりです。
# MegaCli64 -PDList -aALL | grep -E 'Enclosure Device ID|Slot Number|Firmware state|Foreign State'
Enclosure Device ID: 64
Slot Number: 0
Firmware state: Unconfigured(good), Spun Up
Foreign State: None
Enclosure Device ID: 64
Slot Number: 1
Firmware state: Online, Spun Up
Foreign State: None
不足しているディスクのリストは次のとおりです。
# MegaCli64 -Pdgetmissing -a0
Adapter 0 - Missing Physical drives
No. Array Row Size Expected
0 0 0 285148 MB
通常、新しいディスクは不足しているディスクを自動的に置き換え、再構築を開始します。自分で起動しようと試みることはできますが、デバイスが存在しないと言って失敗します。
# MegaCli64 -PdReplaceMissing -physdrv[64:0] -array0 -row0 -a0
Adapter: 0: Failed to replace Missing PD at Array 0, Row 0.
FW error description:
The requested command cannot be completed, as the specified device does not exist.
物理ディスクの完全なクエリは次のとおりです。
Adapter #0
Enclosure Device ID: 64
Slot Number: 0
Enclosure position: N/A
Device Id: 10
WWN: 50000394C8031F29
Seq uence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 264.312 GB [0x210a055e Sectors]
Non Coerced Size: 263.812 GB [0x20fa055e Sectors]
Coerced Size: 263.563 GB [0x20f20800 Sectors]
Sector Size: 0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: 6209
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x50000394c8031f2a
SAS Address(1): 0x0
Connected Port Number: 1(path0)
Inquiry Data: IBM MK3001GRRB 62095360DG92620962096209
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Supported
Drive Temperature : N/A
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 64
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 8
WWN: 5000CCA04352785F
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 279.396 GB [0x22ecb25c Sectors]
Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]
Coerced Size: 278.464 GB [0x22cee000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Commissioned Spare : No
Emergency Spare : No
Device Firmware Level: J2EG
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x5000cca04352785d
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: IBM-ESXSHUC109030CSS60 J2EGKQHGB0USJ2EGJ2EGJ2EG
IBM FRU/CRU: 42D0628
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: 6.0Gb/s
Link Speed: 6.0Gb/s
Media Type: Hard Disk Device
Drive: Not Certified
Drive Temperature :39C (102.20 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: 6.0Gb/s
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00
他に何を試すことができるかについて誰かが何か考えを持っていますか？
交換用ドライブは元のドライブよりも小さく、264.312GB対279.396GBです。同じサイズ以上のドライブが必要です。同数以上のセクターが必要です。